• Dr. Fixit 104 Dampguard Classic Two-Component Internal Wall & RCC Water Tank Damp-Proof Coating, 1 kg - image 1
  • Dr. Fixit 104 Dampguard Classic Two-Component Internal Wall & RCC Water Tank Damp-Proof Coating, 1 kg - image 2
Dr. Fixit 104 Dampguard Classic Two-Component Internal Wall & RCC Water Tank Damp-Proof Coating, 1 kg
Toggle section

Product details

Dr. Fixit 104 Dampguard Classic is a two-component, water-based epoxy damp-proof coating for internal walls and RCC water tanks. When the components are mixed and applied to a prepared surface as directed, the coating provides adhesion and resistance to water, salt water, mild acids, alkalis and soap water. It can be applied to suitable damp concrete or plaster surfaces and has anti-fungal and anti-microbial properties. The product is listed by the manufacturer as suitable for potable water-contact applications under the stated system and application conditions. This 1 kg pack is intended for damp-wall treatment and selected RCC tank coating work.
Toggle section

Features

Hsn code
38244010
Model number
104.0
Manufacturer
Pidilite Industries Limited
Item type name
Internal Wall Coating
Number of packages
1.0
Unit count per product
1.0
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Size name
1 kg
Item weight
1.0
Item weight unit of measure
kg
Are batteries included
No
Is product expirable
Yes
Toggle section

Specification

  • Two-component water-based epoxy damp-proof coating for internal walls and RCC water tanks
  • Can be applied to properly prepared damp concrete or plaster surfaces
  • Provides resistance to water, salt water, mild acids, alkalis and soap water
  • Anti-fungal and anti-microbial properties help protect the treated surface
  • Pack size: 1 kg; mix and apply the complete system according to the technical data sheet
Toggle section

FAQs

1. What is the difference between a coating and an admixture?

A coating forms a film on a finished surface, which works until it is punctured or worn. An admixture reduces permeability from inside the concrete, so there is no film to fail. Serious waterproofing usually uses both, each doing the job it is suited to.

2. Is this a coating I paint on?

Integral compounds are not. They go into the mixing water for concrete, mortar or plaster before it is laid. If you need something applied onto an existing finished surface, that is a different category, a coating or a membrane, and an admixture will not do that job.

3. How much do I add per bag of cement?

Follow the dosage on the pack and in the manufacturer's current literature. Admixtures are dosed against cement content, and exceeding the recommended dose does not make concrete more waterproof; it can affect setting and strength. This is not a material to estimate by eye.

4. Will it stop a roof that is already leaking?

An integral admixture cannot, because it works in fresh concrete or mortar and does nothing added to a slab that has already cured. An existing leak needs its source traced and a repair system suited to the crack or joint involved, with the admixture used in any new screed.

5. Does it replace a membrane on a terrace?

On a critical terrace or a basement raft, an admixture is one layer of defence rather than the only one. It reduces the permeability of the concrete itself. Detailing at junctions, parapets and drainage outlets is where terraces actually leak, and no admixture fixes poor detailing.

6. Can it be used in external plaster?

Where the product lists external plaster among its applications, yes, and it is often used on weather-facing walls where driving rain would otherwise soak the plaster. Masons generally notice the improved workability before anyone notices the effect on water.

7. How should containers be stored?

Sealed, out of direct sun and off a hot roof. Liquid admixtures are water-based and suffer from prolonged heat. Once opened, reseal tightly, because a partly used container left open thickens and the dosage you measure out afterwards is no longer what the label describes.
Toggle section

Why buy from MOB

Buying the 104 Dampguard Classic Two-Component Internal Wall against a published specification beats buying against a photograph. MOB carries the Dr. Fixit range with codes shown, ships stocked lines on Qwik in 1 to 4 hours in serviced areas, and invoices with GST on every order placed.

Professional tips

Detail the junctions, parapets and drain outlets properly before worrying about the middle of the slab. That is where terraces leak, and no product compensates for detailing that was skipped.

Brand: Dr. Fixit|MOBSKU: 586QWI115

Dr. Fixit 104 Dampguard Classic Two-Component Internal Wall & RCC Water Tank Damp-Proof Coating, 1 kg

Rating Star4.6
Delivery details
your selected location
Not deliverable at your location
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Detail the junctions, parapets and drain outlets properly before worrying about the middle of the slab. That is where terraces leak, and no product compensates for detailing that was skipped.