• Dr. Fixit 112 Pidifin 2K Two-Component Flexible Cementitious Waterproof Coating, 3 kg - image 1
  • Dr. Fixit 112 Pidifin 2K Two-Component Flexible Cementitious Waterproof Coating, 3 kg - image 2
Dr. Fixit 112 Pidifin 2K Two-Component Flexible Cementitious Waterproof Coating, 3 kg
Toggle section

Product details

Dr. Fixit 112 Pidifin 2K is a two-component, polymer-modified flexible cementitious waterproofing coating for concrete and masonry substrates. The matched liquid and powder components form a protective coating with good adhesion and flexibility when mixed and applied as directed. It is suited to bathrooms, kitchen wet areas, balconies, chhajjas, canopies, roofs, domestic water tanks and internal damp walls, including selected positive- and negative-side applications described in the product data sheet. This 3 kg pack should be mixed only in the specified proportion and used within its stated working time.
Toggle section

Features

Hsn code
38244010
Model number
112.0
Manufacturer
Pidilite Industries Limited
Item type name
Waterproof Coating
Number of packages
1.0
Unit count per product
1.0
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Size name
3 kg
Item weight
3.0
Item weight unit of measure
kg
Are batteries included
No
Is product expirable
Yes
Toggle section

Specification

  • Two-component flexible cementitious waterproofing coating
  • Designed for sound concrete and masonry surfaces in wet and water-exposed areas
  • Suitable for bathrooms, balconies, roofs, chhajjas, domestic water tanks and damp internal walls
  • Polymer-modified formulation supports adhesion and flexibility when correctly applied
  • Pack size: 3 kg; mix and apply both components as specified in the technical data sheet
Toggle section

FAQs

1. Can I order this with cement and other materials together?

Materials from different categories go on one order and one GST invoice. For a slab pour where cement, admixture and the rest have to land together, an RFQ lets the whole requirement be scheduled as a single delivery rather than three separate arrivals.

2. Why does a treated roof still leak?

Almost always detailing rather than the product. Water finds junctions, parapet upstands, drain outlets and cracks around penetrations. A slab treated in the middle and detailed poorly at the edges leaks exactly where it was always going to leak, whatever went into the mix.

3. What is the difference between a coating and an admixture?

A coating forms a film on a finished surface, which works until it is punctured or worn. An admixture reduces permeability from inside the concrete, so there is no film to fail. Serious waterproofing usually uses both, each doing the job it is suited to.

4. Is this a coating I paint on?

Integral compounds are not. They go into the mixing water for concrete, mortar or plaster before it is laid. If you need something applied onto an existing finished surface, that is a different category, a coating or a membrane, and an admixture will not do that job.

5. How much do I add per bag of cement?

Follow the dosage on the pack and in the manufacturer's current literature. Admixtures are dosed against cement content, and exceeding the recommended dose does not make concrete more waterproof; it can affect setting and strength. This is not a material to estimate by eye.

6. Will it stop a roof that is already leaking?

An integral admixture cannot, because it works in fresh concrete or mortar and does nothing added to a slab that has already cured. An existing leak needs its source traced and a repair system suited to the crack or joint involved, with the admixture used in any new screed.

7. Does it replace a membrane on a terrace?

On a critical terrace or a basement raft, an admixture is one layer of defence rather than the only one. It reduces the permeability of the concrete itself. Detailing at junctions, parapets and drainage outlets is where terraces actually leak, and no admixture fixes poor detailing.
Toggle section

Why buy from MOB

MOB lists the 112 Pidifin 2K Two-Component Flexible Cementitious with its specification and code so nothing turns up as a near match. GST invoicing comes with every order for the site file, contractors can settle on mobCredit terms, and bulk requirements go through RFQ for a project rate.

Professional tips

Keep containers sealed, out of direct sun and off a hot roof. Once opened, reseal tightly, because a partly used container left open thickens and the dosage you measure is no longer what you think.

Brand: Dr. Fixit|MOBSKU: 586QWI105

Dr. Fixit 112 Pidifin 2K Two-Component Flexible Cementitious Waterproof Coating, 3 kg

Rating Star4.5
weight:3.0 kg
Delivery details
your selected location
Not deliverable at your location
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Keep containers sealed, out of direct sun and off a hot roof. Once opened, reseal tightly, because a partly used container left open thickens and the dosage you measure is no longer what you think.