Name: Ebco Hardware Sleek Telescopic Drawer Slide, 300 mm length, 35 kg load, soft close, zinc-plated white finish, Code: STDS30-35-SC
Brand: Ebco Hardware
SKU: 577QWI109
Price: 522.28 INR
Availability: InStock

Question 1

Can I mix this with another brand of hardware?

Accepted Answer

Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.

Question 2

Who should fit this - can a homeowner manage it?

Accepted Answer

A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.

Question 3

How do I make sure a replacement matches in two years?

Accepted Answer

Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.

Question 4

What maintenance does it need?

Accepted Answer

Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.

Question 5

Can I order this in project quantities with a GST invoice?

Accepted Answer

Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.

Question 6

Why does a finish look different between two deliveries?

Accepted Answer

Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.

Question 7

Will this fit my cabinet?

Accepted Answer

The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.

Product details

Features

Specification

FAQs

1. Can I mix this with another brand of hardware?

2. Who should fit this - can a homeowner manage it?

3. How do I make sure a replacement matches in two years?

4. What maintenance does it need?

5. Can I order this in project quantities with a GST invoice?

6. Why does a finish look different between two deliveries?

7. Will this fit my cabinet?

Why buy from MOB

Ebco Hardware Sleek Telescopic Drawer Slide, 300 mm length, 35 kg load, soft close, zinc-plated white finish, Code: STDS30-35-SC

Professional tips