• Ebco Hardware Slip-On Hinge Euro (A), Full Overlay, 0 mm Crank, 35 mm cup, regular close, nickel-plated finish, Code: E-HS1A - image 1
  • Ebco Hardware Slip-On Hinge Euro (A), Full Overlay, 0 mm Crank, 35 mm cup, regular close, nickel-plated finish, Code: E-HS1A - image 2
  • Ebco Hardware Slip-On Hinge Euro (A), Full Overlay, 0 mm Crank, 35 mm cup, regular close, nickel-plated finish, Code: E-HS1A - image 3
Ebco Hardware Slip-On Hinge Euro (A), Full Overlay, 0 mm Crank, 35 mm cup, regular close, nickel-plated finish, Code: E-HS1A
Toggle section

Product details

Ebco Hardware Slip-On Hinge Euro (A) (code E-HS1A) is a regular-closing cabinet hinge for full-overlay, half-overlay or inset shutters. This variant is specified as Full Overlay, 0 mm Crank, 35 mm cup, regular close, nickel-plated finish.
Toggle section

Features

Hsn code
83021010
Model number
E-HS1A
Manufacturer
Ebco Hardware
Item type name
Slip on Hinge - Euro
Number of packages
1
Unit count per product
2
Unit count type
Set
Item length
35
Item length unit of measure
mm
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Item imported
No
Color names
Nickel Plated
Size name
0Crank
Primary material type
Metal
Finish type
Finished
Is product expirable
No
Fulfillment latency
1-4 hours
Toggle section

Specification

  • Product: Slip-On Hinge Euro (A).
  • Variant: Full Overlay, 0 mm Crank, 35 mm cup, regular close, nickel-plated finish.
  • Maximum opening angle: 105°.
  • For 16–19 mm shutter thickness.
  • Product code: E-HS1A.
Toggle section

FAQs

1. Does the listing include mounting hardware and fixings?

The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.

2. How much weight will it carry?

Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.

3. Can I mix this with another brand of hardware?

Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.

4. Who should fit this - can a homeowner manage it?

A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.

5. How do I make sure a replacement matches in two years?

Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.

6. What maintenance does it need?

Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.

7. Can I order this in project quantities with a GST invoice?

Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.
Toggle section

Why buy from MOB

MOB lists the Hardware Slip on Hinge Euro Regular with its specification and code so nothing turns up as a near match. GST invoicing comes with every order for the site file, contractors can settle on mobCredit terms, and bulk requirements go through RFQ for a project rate.

Professional tips

Keep one spare from each pack aside rather than fitting them all. A part damaged at handover is far easier to swap when the match is in the toolbox.

Brand: Ebco Hardware|MOBSKU: 577QWI116

Ebco Hardware Slip-On Hinge Euro (A), Full Overlay, 0 mm Crank, 35 mm cup, regular close, nickel-plated finish, Code: E-HS1A

Rating Star4.6
₹ 65.52 41.5% off
MRP: ₹ 112.00 (With Tax 18.0%) / Set
₹ 64.58PRO price
Unlock
star
: Earnstar0 pointson this purchase
size name:0Crank
Stock: Out of stock
Delivery details
mobCREDITDelivery in 1-4 hrs
mobCREDITRouting ID BENG-69
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Keep one spare from each pack aside rather than fitting them all. A part damaged at handover is far easier to swap when the match is in the toolbox.

₹ 65.52