icon
location1-4 hrs deliveryChevronDown
Bengaluru Karnataka India
Search "Fevicol"
LogoGet₹1000
LogoCart
LogoCategoriesChevronDown
delivery1-4 hrs delivery

Select delivery location

ChevronDown
Contact usLarge order (RFQ)star
  • Ebco Livsmart Kitchen Cutlery Tray 5, for 450 mm cabinet, 340–400 mm adjustable width, 420–490 mm depth, 55 mm height, anthracite finish, Code: KCT5-45-AT - image 1
  • Ebco Livsmart Kitchen Cutlery Tray 5, for 450 mm cabinet, 340–400 mm adjustable width, 420–490 mm depth, 55 mm height, anthracite finish, Code: KCT5-45-AT - image 2
  • Ebco Livsmart Kitchen Cutlery Tray 5, for 450 mm cabinet, 340–400 mm adjustable width, 420–490 mm depth, 55 mm height, anthracite finish, Code: KCT5-45-AT - image 3
Ebco Livsmart Kitchen Cutlery Tray 5, for 450 mm cabinet, 340–400 mm adjustable width, 420–490 mm depth, 55 mm height, anthracite finish, Code: KCT5-45-AT
Toggle section

Product details

Ebco Livsmart Kitchen Cutlery Tray 5 (code KCT5-45-AT) is a cut-to-fit drawer tray with multiple compartments for cutlery and tools. This variant is specified as for 450 mm cabinet, 340–400 mm adjustable width, 420–490 mm depth, 55 mm height, anthracite finish.
Toggle section

Features

Hsn code
83024200
Model number
KCT5-45-AT
Manufacturer
Ebco Hardware
Item type name
Ebco Pro Motion drawer system Kitchen Cutlery Tray - 5
Number of packages
1
Unit count per product
1
Unit count type
Unit
Item length
450
Item length unit of measure
mm
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Item imported
No
Color names
Anthracite
Size name
450mm
Primary material type
Anthracite
Finish type
Finished
Is product expirable
No
Fulfillment latency
1-4 hours
Toggle section

Specification

  • Product: Kitchen Cutlery Tray 5.
  • Variant: For 450 mm cabinet, 340–400 mm adjustable width, 420–490 mm depth, 55 mm height, anthracite finish.
  • Multiple compartments for organised storage.
  • Cut-to-fit adjustable width.
  • Product code: KCT5-45-AT.
Toggle section

FAQs

1. Can I order this in project quantities with a GST invoice?

Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.

2. Why does a finish look different between two deliveries?

Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.

3. Will this fit my cabinet?

The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.

4. Does the listing include mounting hardware and fixings?

The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.

5. How much weight will it carry?

Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.

6. Can I mix this with another brand of hardware?

Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.

7. Who should fit this - can a homeowner manage it?

A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.
AI generated
Toggle section

Why buy from MOB

The Livsmart Pro Motion drawer system Kitchen is the kind of item that holds a job up when it is wrong. MOB lists it against code KCT5-45-AT with the full specification published, so it can be checked before ordering. GST invoicing on every order, and project quantities priced through RFQ.
AI generated
Ebco Livsmart Kitchen Cutlery Tray 5, for 450 mm cabinet, 340–400 mm adjustable width, 420–490 mm depth, 55 mm height, anthracite finish, Code: KCT5-45-AT
Brand: Ebco Livsmart|MOBSKU: 577QWI185

Ebco Livsmart Kitchen Cutlery Tray 5, for 450 mm cabinet, 340–400 mm adjustable width, 420–490 mm depth, 55 mm height, anthracite finish, Code: KCT5-45-AT

Rating Star4.5
₹ 698.10 30.05% off
MRP: ₹ 998.00 (With Tax 18.0%) / Unit
₹ 688.04PRO price
Unlock
star
: Earnstar0 pointson this purchase
size name:450mm
Stock: Available
Delivery details
mobCREDITDelivery in 1-4 hrs
mobCREDITRouting ID BENG-69
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.

AI generated
mob-logo-grey
Construction materials delivered in1-4 Hrs Delivery
Download the MOB app
Google PlayApp Store
Scan to download the MOB app
COMPANY
About usContact usLarge orders(RFQ)Become a partnerLine of CreditBlogs
mobSTAR LoyaltyFAQ'sCancellation & refundReturn policyPrivacy policyTerms and conditions
CONTACT US
Bengaluru
WhatsApp+91 8970415365Call+91 8660423608
Mumbai
Call+91 9187702933
Emailask@madoverbuildings.com
Categories
ISO 27001:2022 certified2026 by Madoverbuilding AI Private Limited
LinkedInFacebookInstagramX (Twitter)
₹ 698.10