• Ebco Livsmart Pro-Motion S3 Drawer System, 122 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS2-50-S3 - image 1
  • Ebco Livsmart Pro-Motion S3 Drawer System, 122 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS2-50-S3 - image 2
  • Ebco Livsmart Pro-Motion S3 Drawer System, 122 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS2-50-S3 - image 3
  • Ebco Livsmart Pro-Motion S3 Drawer System, 122 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS2-50-S3 - image 4
  • Ebco Livsmart Pro-Motion S3 Drawer System, 122 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS2-50-S3 - image 5
  • Ebco Livsmart Pro-Motion S3 Drawer System, 122 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS2-50-S3 - image 6
  • Ebco Livsmart Pro-Motion S3 Drawer System, 122 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS2-50-S3 - image 7
Ebco Livsmart Pro-Motion S3 Drawer System, 122 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS2-50-S3
Toggle section

Product details

Ebco Livsmart Pro-Motion S3 Drawer System (code PMDS2-50-S3) is a full-extension soft-close drawer system with 122 mm side panels. This variant is specified as 122 mm side height x 500 mm length, 50 kg load, black finish.
Toggle section

Features

Hsn code
83024200
Model number
PMDS2-50-S3
Manufacturer
Ebco Hardware
Item type name
Ebco Pro Motion drawer system 122- S3 Series
Number of packages
1
Unit count per product
1
Unit count type
Set
Item length
500
Item length unit of measure
mm
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Item imported
No
Color names
Black
Size name
122mm x 500mm
Primary material type
Black
Finish type
Finished
Is product expirable
No
Fulfillment latency
1-4 hours
Toggle section

Specification

  • Product: Pro-Motion S3 Drawer System.
  • Variant: 122 mm side height x 500 mm length, 50 kg load, black finish.
  • Full extension with soft close.
  • Quick installation and dismantling.
  • Product code: PMDS2-50-S3.
Toggle section

FAQs

1. Does the listing include mounting hardware and fixings?

The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.

2. How much weight will it carry?

Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.

3. Can I mix this with another brand of hardware?

Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.

4. Who should fit this - can a homeowner manage it?

A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.

5. How do I make sure a replacement matches in two years?

Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.

6. What maintenance does it need?

Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.

7. Can I order this in project quantities with a GST invoice?

Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.
Toggle section

Why buy from MOB

MOB lists the Livsmart Tandem Box Pro Motion drawer with its specification and code so nothing turns up as a near match. GST invoicing comes with every order for the site file, contractors can settle on mobCredit terms, and bulk requirements go through RFQ for a project rate.
Brand: Ebco Livsmart|MOBSKU: 577QWI179

Ebco Livsmart Pro-Motion S3 Drawer System, 122 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS2-50-S3

Rating Star4.5
₹ 2858.89 31.28% off
MRP: ₹ 4160.00 (With Tax 18.0%) / Set
₹ 2817.65PRO price
Unlock
star
: Earnstar0 pointson this purchase
colour:Black
size name:122mm x 500mm
Stock: Available
Delivery details
mobCREDITDelivery in 1-4 hrs
mobCREDITRouting ID BENG-69
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Keep one spare from each pack aside rather than fitting them all. A part damaged at handover is far easier to swap when the match is in the toolbox.

₹ 2858.89