• Ebco Livsmart Pro-Motion S3 Drawer System, 172 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS3-50-S3 - image 1
  • Ebco Livsmart Pro-Motion S3 Drawer System, 172 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS3-50-S3 - image 2
  • Ebco Livsmart Pro-Motion S3 Drawer System, 172 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS3-50-S3 - image 3
  • Ebco Livsmart Pro-Motion S3 Drawer System, 172 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS3-50-S3 - image 4
  • Ebco Livsmart Pro-Motion S3 Drawer System, 172 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS3-50-S3 - image 5
  • Ebco Livsmart Pro-Motion S3 Drawer System, 172 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS3-50-S3 - image 6
  • Ebco Livsmart Pro-Motion S3 Drawer System, 172 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS3-50-S3 - image 7
Ebco Livsmart Pro-Motion S3 Drawer System, 172 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS3-50-S3
Toggle section

Product details

Ebco Livsmart Pro-Motion S3 Drawer System (code PMDS3-50-S3) is a full-extension soft-close drawer system with 172 mm side panels. This variant is specified as 172 mm side height x 500 mm length, 50 kg load, black finish.
Toggle section

Features

Hsn code
83024200
Model number
PMDS3-50-S3
Manufacturer
Ebco Hardware
Item type name
Ebco Pro Motion drawer system 172- S3 Series
Number of packages
1
Unit count per product
1
Unit count type
Set
Item length
500
Item length unit of measure
mm
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Item imported
No
Color names
Black
Size name
172mm x 500mm
Primary material type
Black
Finish type
Finished
Is product expirable
No
Fulfillment latency
1-4 hours
Toggle section

Specification

  • Product: Pro-Motion S3 Drawer System.
  • Variant: 172 mm side height x 500 mm length, 50 kg load, black finish.
  • Full extension with soft close.
  • Quick installation and dismantling.
  • Product code: PMDS3-50-S3.
Toggle section

FAQs

1. Can I order this in project quantities with a GST invoice?

Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.

2. Why does a finish look different between two deliveries?

Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.

3. Will this fit my cabinet?

The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.

4. Does the listing include mounting hardware and fixings?

The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.

5. How much weight will it carry?

Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.

6. Can I mix this with another brand of hardware?

Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.

7. Who should fit this - can a homeowner manage it?

A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.
Toggle section

Why buy from MOB

Sites need the Livsmart Tandem Box Pro Motion drawer on the day, not the week. Stocked lines move on Qwik within 1 to 4 hours where the service runs, code PMDS3-50-S3 stays on the invoice for reorders, and larger schedules can be priced together through RFQ with GST invoicing.
Brand: Ebco Livsmart|MOBSKU: 577QWI183

Ebco Livsmart Pro-Motion S3 Drawer System, 172 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS3-50-S3

Rating Star4.8
₹ 3230.68 31.28% off
MRP: ₹ 4701.00 (With Tax 18.0%) / Set
₹ 3184.08PRO price
Unlock
star
: Earnstar0 pointson this purchase
colour:Black
size name:172mm x 500mm
Stock: Available
Delivery details
mobCREDITDelivery in 1-4 hrs
mobCREDITRouting ID BENG-69
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.

₹ 3230.68