icon
location1-4 hrs deliveryChevronDown
Bengaluru Karnataka India
Search "Fevicol"
LogoGet₹1000
LogoCart
LogoCategoriesChevronDown
delivery1-4 hrs delivery

Select delivery location

ChevronDown
Contact usLarge order (RFQ)star
  • Ebco Livsmart Pro-Motion S3 Drawer System, 90 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS1-50-S3 - image 1
  • Ebco Livsmart Pro-Motion S3 Drawer System, 90 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS1-50-S3 - image 2
  • Ebco Livsmart Pro-Motion S3 Drawer System, 90 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS1-50-S3 - image 3
  • Ebco Livsmart Pro-Motion S3 Drawer System, 90 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS1-50-S3 - image 4
  • Ebco Livsmart Pro-Motion S3 Drawer System, 90 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS1-50-S3 - image 5
  • Ebco Livsmart Pro-Motion S3 Drawer System, 90 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS1-50-S3 - image 6
Ebco Livsmart Pro-Motion S3 Drawer System, 90 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS1-50-S3
Toggle section

Product details

Ebco Livsmart Pro-Motion S3 Drawer System (code PMDS1-50-S3) is a full-extension soft-close drawer system with 90 mm side panels. This variant is specified as 90 mm side height x 500 mm length, 50 kg load, black finish.
Toggle section

Features

Hsn code
83024200
Model number
PMDS1-50-S3
Manufacturer
Ebco Hardware
Item type name
Ebco Pro Motion drawer system 90- S3 Series
Number of packages
1
Unit count per product
1
Unit count type
Set
Item length
s
Item length unit of measure
mm
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Item imported
No
Color names
Black
Size name
90mm x 500mm
Primary material type
Black
Finish type
Finished
Is product expirable
No
Fulfillment latency
1-4 hours
Toggle section

Specification

  • Product: Pro-Motion S3 Drawer System.
  • Variant: 90 mm side height x 500 mm length, 50 kg load, black finish.
  • Full extension with soft close.
  • Quick installation and dismantling.
  • Product code: PMDS1-50-S3.
Toggle section

FAQs

1. What maintenance does it need?

Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.

2. Can I order this in project quantities with a GST invoice?

Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.

3. Why does a finish look different between two deliveries?

Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.

4. Will this fit my cabinet?

The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.

5. Does the listing include mounting hardware and fixings?

The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.

6. How much weight will it carry?

Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.

7. Can I mix this with another brand of hardware?

Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.
AI generated
Toggle section

Why buy from MOB

Getting the wrong variant of the Livsmart Tandem Box Pro Motion drawer costs a day rather than a discount. MOB publishes the specification against code PMDS1-50-S3, invoices with GST on every order, and prices project quantities through RFQ so a whole schedule arrives together.
AI generated
Ebco Livsmart Pro-Motion S3 Drawer System, 90 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS1-50-S3
Brand: Ebco Livsmart|MOBSKU: 577QWI175

Ebco Livsmart Pro-Motion S3 Drawer System, 90 mm side height x 500 mm length, 50 kg load, black finish, Code: PMDS1-50-S3

Rating Star4.7
₹ 2667.15 31.28% off
MRP: ₹ 3881.00 (With Tax 18.0%) / Set
₹ 2628.68PRO price
Unlock
star
: Earnstar0 pointson this purchase
colour:Black
size name:90mm x 500mm
Stock: Available
Delivery details
mobCREDITDelivery in 1-4 hrs
mobCREDITRouting ID BENG-69
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.

AI generated
mob-logo-grey
Construction materials delivered in1-4 Hrs Delivery
Download the MOB app
Google PlayApp Store
Scan to download the MOB app
COMPANY
About usContact usLarge orders(RFQ)Become a partnerLine of CreditBlogs
mobSTAR LoyaltyFAQ'sCancellation & refundReturn policyPrivacy policyTerms and conditions
CONTACT US
Bengaluru
WhatsApp+91 8970415365Call+91 8660423608
Mumbai
Call+91 9187702933
Emailask@madoverbuildings.com
Categories
ISO 27001:2022 certified2026 by Madoverbuilding AI Private Limited
LinkedInFacebookInstagramX (Twitter)
₹ 2667.15