1-4 hrs delivery
Bengaluru Karnataka India
Get₹1000
Cart
Categories1-4 hrs deliverySelect delivery location
Product details
Hettich ArciTech Silver Front Connector H94. This component forms part of the named Hettich drawer assembly. For combining with aluminium front panel or Glass/any chosen material of 6 mm. For Drawer Height : 94 mm. For combining with aluminium front panel or, when using a front panel in any chosen material, profile for front panel. When using any chosen material with a total load of up to 60 kg.
Features
Hsn code
83024200
Model number
9123083
Manufacturer
Hettich India Private Limited
Item type name
Drawer System Accessory
Unit count per product
1
Unit count type
Set
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Manufacturer part number
Silver
Intended product use with
H94
Color names
Silver
Size name
H94
Fulfillment latency
1-4 hours
Specification
- Finish: Silver.
- For combining with aluminium front panel or Glass/any chosen material of 6 mm.
- For Drawer Height : 94 mm.
- For combining with aluminium front panel or, when using a front panel in any chosen material, profile for front panel.
- When using any chosen material with a total load of up to 60 kg.
FAQs
1. Why does a finish look different between two deliveries?
Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.2. Will this fit my cabinet?
The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.3. Does the listing include mounting hardware and fixings?
The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.4. How much weight will it carry?
Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.5. Can I mix this with another brand of hardware?
Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.6. Who should fit this - can a homeowner manage it?
A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.7. How do I make sure a replacement matches in two years?
Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.AI generated
Why buy from MOB
MOB lists the ArciTech Silver Front Connector H94 with its specification and code so nothing turns up as a near match. GST invoicing comes with every order for the site file, contractors can settle on mobCredit terms, and bulk requirements go through RFQ for a project rate.
AI generated
Professional tips
Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.
AI generated
Hettich ArciTech Silver Front Connector H94, Article 9123083
₹ 1414.65 27.45% off
MRP: ₹ 1950.00 (With Tax 18.0%) / Set
₹ 1401.31
: Earn
0 pointson this purchase
0 pointson this purchasesize name:H94
Stock: Available
Delivery details
Delivery in 1-4 hrs
Routing ID BENG-415
Professional tips
Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.
AI generated
2026 by Madoverbuilding AI Private Limited
₹ 1414.65