Select delivery location

Product details
Hettich BIN.IT EASY 2 x 7.5 L. This article provides the bin or bin-support arrangement identified in the product name for a compatible kitchen cabinet. Pull-out system with full extension runner, simple bottom panel installation. With automatic lid - lid opens as it is pulled out. Min. inside installation dimensions: Width 230 mm, Depth 380 mm, Height 360 mm. Bin and lid of grey plastic.
Features
Hsn code
39249000
Model number
9079929
Manufacturer
Hettich India Private Limited
Item type name
Cabinet Waste Bin / Holder
Unit count per product
1
Unit count type
Set
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Fulfillment latency
1-4 hours
Specification
- Pull-out system with full extension runner, simple bottom panel installation.
- With automatic lid - lid opens as it is pulled out.
- Min. inside installation dimensions: Width 230 mm, Depth 380 mm, Height 360 mm.
- Bin and lid of grey plastic.
- Pull-out system, powder coated steel, silver.
FAQs
1. Does the listing include mounting hardware and fixings?
The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.2. How much weight will it carry?
Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.3. Can I mix this with another brand of hardware?
Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.4. Who should fit this - can a homeowner manage it?
A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.5. How do I make sure a replacement matches in two years?
Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.6. What maintenance does it need?
Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.7. Can I order this in project quantities with a GST invoice?
Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.Why buy from MOB
Sites need the BIN.IT EASY 2 x 7.5 L on the day, not the week. Stocked lines move on Qwik within 1 to 4 hours where the service runs, code 9079929 stays on the invoice for reorders, and larger schedules can be priced together through RFQ with GST invoicing.
AI generated
Professional tips
Keep one spare from each pack aside rather than fitting them all. A part damaged at handover is far easier to swap when the match is in the toolbox.





Hettich BIN.IT EASY 2 x 7.5 L, Article 9079929
₹ 10265.32 27.45% off
MRP: ₹ 14150.00 (With Tax 18.0%) / Set
: Earn
0 pointson this purchase
Stock: Available
Professional tips
Keep one spare from each pack aside rather than fitting them all. A part damaged at handover is far easier to swap when the match is in the toolbox.
COMPANY
CONTACT US
Categories
₹ 10265.32