Download MOB app forbetter experience

Download
  • Hettich CargoTech M Thali Inlet Cabinet 450 mm 386 x 500 x 200 mm, Article 9194315 - image 1
  • Hettich CargoTech M Thali Inlet Cabinet 450 mm 386 x 500 x 200 mm, Article 9194315 - image 2
Hettich CargoTech M Thali Inlet Cabinet 450 mm 386 x 500 x 200 mm, Article 9194315
Toggle section

Product details

Hettich CargoTech M Thali Inlet Cabinet 450 mm 386 x 500 x 200 mm. This insert creates the named storage arrangement inside a compatible basket. It is an internal organiser rather than a complete basket-and-runner assembly. Selected configuration: Cab450 / 386x500x200. Convenient way of keeping thali. Recommended shutter height ≥360 mm. Order KA telescopic runner separately.
Toggle section

Features

Hsn code
73239390
Model number
9194315
Manufacturer
Hettich India Private Limited
Item type name
Basket Insert
Unit count per product
1
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Intended product use with
Cab450 / 386x500x200
Size name
Cab450 / 386x500x200
Fulfillment latency
1-4 hours
Toggle section

Specification

  • Selected configuration: Cab450 / 386x500x200.
  • Convenient way of keeping thali.
  • Recommended shutter height ≥360 mm.
  • Order KA telescopic runner separately.
  • Number of thalis for basket depth: 500 mm - 11 nos.
Toggle section

FAQs

1. Why does a finish look different between two deliveries?

Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.

2. Will this fit my cabinet?

The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.

3. Does the listing include mounting hardware and fixings?

The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.

4. How much weight will it carry?

Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.

5. Can I mix this with another brand of hardware?

Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.

6. Who should fit this - can a homeowner manage it?

A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.

7. How do I make sure a replacement matches in two years?

Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.
Toggle section

Why buy from MOB

Buying the CargoTech M Thali Inlet Cabinet 450 against a published specification beats buying against a photograph. MOB carries the Hettich range with codes shown, ships stocked lines on Qwik in 1 to 4 hours in serviced areas, and invoices with GST on every order placed.

Professional tips

Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.

Brand: Hettich|MOBSKU: 577QWI683

Hettich CargoTech M Thali Inlet Cabinet 450 mm 386 x 500 x 200 mm, Article 9194315

Rating Star4.9
₹ 2562.64 34.96% off
MRP: ₹ 3940.00 (With Tax 18.0%) / Unit
₹ 2538.46PRO price
Unlock
star
: Earnstar0 pointson this purchase
size name:Cab450 / 386x500x200
Stock: Available
Delivery details
mobCREDITDelivery in 1-4 hrs
mobCREDITRouting ID BENG-415
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.

₹ 2562.64