Select delivery location

Product details
Hettich CargoTech Plate Inlet Height 200 mm. This insert creates the named storage arrangement inside a compatible basket. It is an internal organiser rather than a complete basket-and-runner assembly. To be used with 200 mm CargoTech basket. Four end connectors fix inlet to basket on 2nd wire from the top. Less clutter noise as plate touches inlet at two places. Recommended shutter height ≥360 mm.
Features
Hsn code
73239390
Model number
9156343
Manufacturer
Hettich India Private Limited
Item type name
Basket Insert
Unit count per product
1
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Intended product use with
200 mm
Size name
200 mm
Fulfillment latency
1-4 hours
Specification
- To be used with 200 mm CargoTech basket.
- Four end connectors fix inlet to basket on 2nd wire from the top.
- Less clutter noise as plate touches inlet at two places.
- Recommended shutter height ≥360 mm.
- Basket depth 500 mm: capacity 17 nos.
FAQs
1. What maintenance does it need?
Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.2. Can I order this in project quantities with a GST invoice?
Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.3. Why does a finish look different between two deliveries?
Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.4. Will this fit my cabinet?
The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.5. Does the listing include mounting hardware and fixings?
The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.6. How much weight will it carry?
Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.7. Can I mix this with another brand of hardware?
Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.Why buy from MOB
MOB lists the CargoTech Plate Inlet Height 200 mm with its specification and code so nothing turns up as a near match. GST invoicing comes with every order for the site file, contractors can settle on mobCredit terms, and bulk requirements go through RFQ for a project rate.
AI generated
Professional tips
Keep one spare from each pack aside rather than fitting them all. A part damaged at handover is far easier to swap when the match is in the toolbox.







Hettich CargoTech Plate Inlet Height 200 mm, Article 9156343
₹ 1164.24 34.96% off
MRP: ₹ 1790.00 (With Tax 18.0%) / Unit
: Earn
0 pointson this purchase
Stock: Available
Professional tips
Keep one spare from each pack aside rather than fitting them all. A part damaged at handover is far easier to swap when the match is in the toolbox.
COMPANY
CONTACT US
Categories
₹ 1164.24