• Hettich Duo Lift 18 Garment Lift 18 kg Inside Cabinet Width 750-1150 mm, Article 9079882 - image 1
  • Hettich Duo Lift 18 Garment Lift 18 kg Inside Cabinet Width 750-1150 mm, Article 9079882 - image 2
Hettich Duo Lift 18 Garment Lift 18 kg Inside Cabinet Width 750-1150 mm, Article 9079882
Toggle section

Product details

Hettich Duo Lift 18 Garment Lift 18 kg Inside Cabinet Width 750-1150 mm. The pivoting garment rail brings hanging clothes down from the upper part of a wardrobe. Connection on both sides. Loading capacity 18 kg. Telescopic width adjustment for inside carcase widths of 750 – 1150 mm. Additional telescopic garment rail integrated in right-hand housing.
Toggle section

Features

Hsn code
83024200
Model number
9079882
Manufacturer
Hettich India Private Limited
Item type name
Wardrobe Garment Lift
Unit count per product
1
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Intended product use with
18 kg / 750-1150 mm
Size name
18 kg / 750-1150 mm
Fulfillment latency
1-4 hours
Toggle section

Specification

  • Connection on both sides.
  • Loading capacity 18 kg.
  • Telescopic width adjustment for inside carcase widths of 750 – 1150 mm.
  • Additional telescopic garment rail integrated in right-hand housing.
  • Optional spacer for bridging door protrusion.
Toggle section

FAQs

1. Who should fit this - can a homeowner manage it?

A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.

2. How do I make sure a replacement matches in two years?

Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.

3. What maintenance does it need?

Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.

4. Can I order this in project quantities with a GST invoice?

Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.

5. Why does a finish look different between two deliveries?

Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.

6. Will this fit my cabinet?

The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.

7. Does the listing include mounting hardware and fixings?

The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.
Toggle section

Why buy from MOB

Getting the wrong variant of the Duo Lift 18 Garment Lift 18 costs a day rather than a discount. MOB publishes the specification against code 9079882, invoices with GST on every order, and prices project quantities through RFQ so a whole schedule arrives together.

Professional tips

Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.

Brand: Hettich|MOBSKU: 577QWI753

Hettich Duo Lift 18 Garment Lift 18 kg Inside Cabinet Width 750-1150 mm, Article 9079882

Rating Star5
₹ 10805.66 33.71% off
MRP: ₹ 16300.00 (With Tax 18.0%) / Unit
₹ 10703.72PRO price
Unlock
star
: Earnstar0 pointson this purchase
Stock: Available
Delivery details
mobCREDITDelivery in 1-4 hrs
mobCREDITRouting ID BENG-415
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.

₹ 10805.66