1-4 hrs delivery
Bengaluru Karnataka India
Get₹1000
Cart
Categories1-4 hrs deliverySelect delivery location
Product details
Hettich Flap Lift Exact 90 (4.6 kg) Right. The right-hand Lift Exact 90 fitting supports a top-box cabinet flap. Right-hand fitting. Load designation: 4.6 kg. Order the compatible hinges separately.
Features
Hsn code
83024200
Model number
10921 R
Manufacturer
Hettich India Private Limited
Item type name
Lift and Flap Fitting
Unit count per product
1
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Intended product use with
4.6 kg
Size name
4.6 kg
Fulfillment latency
1-4 hours
Specification
- Right-hand fitting.
- Load designation: 4.6 kg.
- Order the compatible hinges separately.
FAQs
1. Why does a finish look different between two deliveries?
Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.2. Will this fit my cabinet?
The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.3. Does the listing include mounting hardware and fixings?
The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.4. How much weight will it carry?
Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.5. Can I mix this with another brand of hardware?
Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.6. Who should fit this - can a homeowner manage it?
A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.7. How do I make sure a replacement matches in two years?
Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.AI generated
Why buy from MOB
Sites need the Flap Lift Exact 90 (4.6 kg) on the day, not the week. Stocked lines move on Qwik within 1 to 4 hours where the service runs, code 10921 stays on the invoice for reorders, and larger schedules can be priced together through RFQ with GST invoicing.
AI generated
Professional tips
Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.
AI generated
Hettich Flap Lift Exact 90 (4.6 kg) Right, Article 10921 R
₹ 487.51 27.45% off
MRP: ₹ 672.00 (With Tax 18.0%) / Unit
₹ 482.91
: Earn
0 pointson this purchase
0 pointson this purchaseStock: Available
Delivery details
Delivery in 1-4 hrs
Routing ID BENG-415
Professional tips
Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.
AI generated
2026 by Madoverbuilding AI Private Limited
₹ 487.51