• Hettich KA 5332 35 kg Drawer Runner 250 mm Zinc, Article 9382860 - image 1
  • Hettich KA 5332 35 kg Drawer Runner 250 mm Zinc, Article 9382860 - image 2
Hettich KA 5332 35 kg Drawer Runner 250 mm Zinc, Article 9382860
Toggle section

Product details

Hettich KA 5332 35 kg Drawer Runner 250 mm Zinc. This telescopic ball-bearing runner mounts at the side of a compatible drawer. Full drawer extension. Selected configuration: 250 mm / 35 kg. Full Extension drawer runner with Zinc Finish.
Toggle section

Features

Hsn code
83024200
Model number
9382860
Manufacturer
Hettich India Private Limited
Item type name
Drawer Runner / Slide
Unit count per product
1
Unit count type
Set
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Manufacturer part number
Zinc
Intended product use with
250 mm / 35 kg
Color names
Zinc
Size name
250 mm / 35 kg
Fulfillment latency
1-4 hours
Toggle section

Specification

  • Full drawer extension.
  • Selected configuration: 250 mm / 35 kg.
  • Finish: Zinc.
  • Full Extension drawer runner with Zinc Finish.
Toggle section

FAQs

1. How much weight will it carry?

Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.

2. Can I mix this with another brand of hardware?

Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.

3. Who should fit this - can a homeowner manage it?

A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.

4. How do I make sure a replacement matches in two years?

Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.

5. What maintenance does it need?

Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.

6. Can I order this in project quantities with a GST invoice?

Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.

7. Why does a finish look different between two deliveries?

Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.
Toggle section

Why buy from MOB

Sites need the KA 5332 35 kg Drawer Runner on the day, not the week. Stocked lines move on Qwik within 1 to 4 hours where the service runs, code 9382860 stays on the invoice for reorders, and larger schedules can be priced together through RFQ with GST invoicing.

Professional tips

Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.

Brand: Hettich|MOBSKU: 577QWI446

Hettich KA 5332 35 kg Drawer Runner 250 mm Zinc, Article 9382860

Rating Star4.8
₹ 246.41 37.46% off
MRP: ₹ 394.00 (With Tax 18.0%) / Set
₹ 244.08PRO price
Unlock
star
: Earnstar0 pointson this purchase
colour:Zinc
size name:250 mm / 35 kg
Stock: Available
Delivery details
mobCREDITDelivery in 1-4 hrs
mobCREDITRouting ID BENG-415
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.

₹ 246.41