1-4 hrs delivery
Bengaluru Karnataka India
Get₹1000
Cart
Categories1-4 hrs deliverySelect delivery location
Product details
Hettich KA 5632 45 kg Drawer Runner 200 mm Zinc. This telescopic ball-bearing runner mounts at the side of a compatible drawer. Full drawer extension. Selected configuration: 200 mm / 45 kg. Precision full extension runner with pull-out stop and roll-out guard. Loading Capacity 45 Kg.
Features
Hsn code
83024200
Model number
9293321
Manufacturer
Hettich India Private Limited
Item type name
Drawer Runner / Slide
Unit count per product
1
Unit count type
Set
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Manufacturer part number
Zinc
Intended product use with
200 mm / 45 kg
Color names
Zinc
Size name
200 mm / 45 kg
Fulfillment latency
1-4 hours
Specification
- Full drawer extension.
- Selected configuration: 200 mm / 45 kg.
- Finish: Zinc.
- Precision full extension runner with pull-out stop and roll-out guard.
- Loading Capacity 45 Kg.
FAQs
1. Will a 200 mm runner work in a standard 450 mm deep kitchen cabinet?
The runner is 200 mm long, so it needs a carcass at least that deep. It will physically fit a 450 mm cabinet with room to spare, but the drawer box you build will be short relative to the cabinet. Most fitters use this length for shallow drawers, vanity units and filing drawers rather than full-depth kitchen drawers.2. What does the 45 kg rating actually mean in a drawer?
It is the load the runner set is rated to carry, not the weight of the drawer box itself. Deduct the drawer's own weight before loading, since a 19 mm ply box is already 3 to 5 kg. For crockery drawers and file drawers 45 kg leaves margin. For pantry pull-outs carrying stone jars or bulk grain, size up.3. Is the zinc finish suitable for a kitchen or bathroom cabinet?
Zinc plating gives reasonable protection against the humidity of a kitchen or vanity cabinet. It is not a marine-grade finish. If the cabinet sits under a sink where a slow leak can keep the runner damp for days, fix the leak. No plated steel runner survives standing water indefinitely.4. Does a pack of 10 sets mean 10 drawers or 5?
One set is the pair needed for one drawer, a left and a right member. A pack unit of 10 sets therefore covers 10 drawers. Check this against your cutting list before ordering, because counting in pieces instead of sets is the commonest quantity mistake on hardware orders.5. Can I use this runner with a Hettich soft-close mechanism?
The source listing specifies the compatible range as KA 5632, 45 kg. Add-on mechanisms and accessories are sold against specific runner ranges, so check the accessory's own compatibility list against KA 5632 before ordering. If you are unsure, quote article code 9293321 when you ask and match against that.6. Who fits these - can a homeowner do it?
A carpenter usually does, because the accuracy is in the marking rather than the fixing. The runner has to sit level and parallel on both sides of the carcass. A couple of millimetres of error and the drawer binds or the front sits crooked. Replacing like for like in an existing cabinet is within reach of a careful DIY fitter.7. Can I order these in project quantities with a GST invoice?
Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms rather than paying per delivery.AI generated
Why buy from MOB
Hardware like this is bought by the pack, not the piece. MOB lists the Hettich article code against every size, so your reorder in three months is the same runner, with GST invoicing throughout. For a full kitchen or a builder's flat-batch, send the quantities through RFQ and get a project rate.
AI generated
Professional tips
Mount the cabinet member first and use a scrap batten as a height gauge for every drawer in the bank. Eyeballing each one is how you end up with drawer fronts that do not line up across a kitchen run.
AI generated
Hettich KA 5632 45 kg Drawer Runner 200 mm Zinc, Article 9293321
₹ 306.45 37.46% off
MRP: ₹ 490.00 (With Tax 18.0%) / Set
₹ 303.56
: Earn
0 pointson this purchase
0 pointson this purchasecolour:Zinc
size name:200 mm / 45 kg
Stock: Available
Delivery details
Delivery in 1-4 hrs
Routing ID BENG-415
Professional tips
Mount the cabinet member first and use a scrap batten as a height gauge for every drawer in the bank. Eyeballing each one is how you end up with drawer fronts that do not line up across a kitchen run.
AI generated
2026 by Madoverbuilding AI Private Limited
₹ 306.45