• Hettich LiftEase Upward Opening - H (Heavy) free stop 400-500mm H - Black, Article 9347378 - image 1
  • Hettich LiftEase Upward Opening - H (Heavy) free stop 400-500mm H - Black, Article 9347378 - image 2
Hettich LiftEase Upward Opening - H (Heavy) free stop 400-500mm H - Black, Article 9347378
Toggle section

Product details

Hettich LiftEase Upward Opening - H (Heavy) free stop 400-500mm H - Black. This fitting supports an upward-opening cabinet front. The opening force is adjustable for the specified front and cabinet dimensions. For compatible wooden or aluminium-framed fronts. Opening angle up to 100°. Minimum carcase depth: 200 mm. Soft closing depends on the concealed hinges used.
Toggle section

Features

Hsn code
83024200
Model number
9347378
Manufacturer
Hettich India Private Limited
Item type name
Lift and Flap Fitting
Unit count per product
1
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Manufacturer part number
Black
Intended product use with
400-500mm H
Color names
Black
Size name
400-500mm H
Fulfillment latency
1-4 hours
Toggle section

Specification

  • For compatible wooden or aluminium-framed fronts.
  • Opening angle up to 100°.
  • Minimum carcase depth: 200 mm.
  • Soft closing depends on the concealed hinges used.
  • Order the compatible concealed hinges separately.
Toggle section

FAQs

1. How much weight will it carry?

Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.

2. Can I mix this with another brand of hardware?

Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.

3. Who should fit this - can a homeowner manage it?

A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.

4. How do I make sure a replacement matches in two years?

Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.

5. What maintenance does it need?

Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.

6. Can I order this in project quantities with a GST invoice?

Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.

7. Why does a finish look different between two deliveries?

Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.
Toggle section

Why buy from MOB

Buying the LiftEase Upward Opening - H (Heavy) against a published specification beats buying against a photograph. MOB carries the Hettich range with codes shown, ships stocked lines on Qwik in 1 to 4 hours in serviced areas, and invoices with GST on every order placed.

Professional tips

Keep one spare from each pack aside rather than fitting them all. A part damaged at handover is far easier to swap when the match is in the toolbox.

Brand: Hettich|MOBSKU: 577QWI263

Hettich LiftEase Upward Opening - H (Heavy) free stop 400-500mm H - Black, Article 9347378

Rating Star4.6
₹ 1265.81 31.21% off
MRP: ₹ 1840.00 (With Tax 18.0%) / Unit
₹ 1253.87PRO price
Unlock
star
: Earnstar0 pointson this purchase
Stock: Available
Delivery details
mobCREDITDelivery in 1-4 hrs
mobCREDITRouting ID BENG-415
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Keep one spare from each pack aside rather than fitting them all. A part damaged at handover is far easier to swap when the match is in the toolbox.

₹ 1265.81