Select delivery location

Product details
Hettich Moving Corner Cargo Series Right Mechanism Chrome Finish. This article belongs to the named cabinet-corner storage system. For a 900-1000 mm wide blind-corner cabinet. Basket set and handed mechanism are separate articles.
Features
Hsn code
94039010
Model number
9221243
Manufacturer
Hettich India Private Limited
Item type name
Corner Storage Fitting
Unit count per product
1
Unit count type
Set
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Manufacturer part number
Chrome
Intended product use with
Right Mechanism
Color names
Chrome
Size name
Right Mechanism
Fulfillment latency
1-4 hours
Specification
- For a 900-1000 mm wide blind-corner cabinet.
- Basket set and handed mechanism are separate articles.
- Selected configuration: Right Mechanism.
- Finish: Chrome.
FAQs
1. How do I make sure a replacement matches in two years?
Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.2. What maintenance does it need?
Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.3. Can I order this in project quantities with a GST invoice?
Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.4. Why does a finish look different between two deliveries?
Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.5. Will this fit my cabinet?
The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.6. Does the listing include mounting hardware and fixings?
The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.7. How much weight will it carry?
Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.Why buy from MOB
MOB lists the Moving Corner Cargo Series Right Mechanism with its specification and code so nothing turns up as a near match. GST invoicing comes with every order for the site file, contractors can settle on mobCredit terms, and bulk requirements go through RFQ for a project rate.
AI generated
Professional tips
Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.





Hettich Moving Corner Cargo Series Right Mechanism Chrome Finish, Article 9221243
₹ 27538.24 31.21% off
MRP: ₹ 40030.00 (With Tax 18.0%) / Set
: Earn
0 pointson this purchase
size name:Right Mechanism
Stock: Available
Professional tips
Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.
COMPANY
CONTACT US
Categories
₹ 27538.24