Select delivery location

Product details
Hettich Pull Out Shelf Wall Unit Cabinet 600 mm W 536 x D 250 x H 41 mm. This Cargo pull-out shelf provides accessible storage inside a compatible wall cabinet. Cabinet outer width: 600 mm. Product dimensions (W x D x H): 536 x 250 x 41 mm. Compatible with KA telescopic or Quadro runner arrangements.
Features
Hsn code
73239390
Model number
9209343
Manufacturer
Hettich India Private Limited
Item type name
Cabinet Pull-Out Shelf
Unit count per product
1
Unit count type
Set
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Intended product use with
Cab600 / 536x250x41
Size name
Cab600 / 536x250x41
Fulfillment latency
1-4 hours
Specification
- Cabinet outer width: 600 mm.
- Product dimensions (W x D x H): 536 x 250 x 41 mm.
- Compatible with KA telescopic or Quadro runner arrangements.
FAQs
1. How much weight will it carry?
Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.2. Can I mix this with another brand of hardware?
Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.3. Who should fit this - can a homeowner manage it?
A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.4. How do I make sure a replacement matches in two years?
Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.5. What maintenance does it need?
Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.6. Can I order this in project quantities with a GST invoice?
Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.7. Why does a finish look different between two deliveries?
Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.Why buy from MOB
The Pull Out Shelf Wall Unit Cabinet is the kind of item that holds a job up when it is wrong. MOB lists it against code 9209343 with the full specification published, so it can be checked before ordering. GST invoicing on every order, and project quantities priced through RFQ.
AI generated
Professional tips
Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.





Hettich Pull Out Shelf Wall Unit Cabinet 600 mm W 536 x D 250 x H 41 mm, Article 9209343
₹ 1918.73 34.96% off
MRP: ₹ 2950.00 (With Tax 18.0%) / Set
: Earn
0 pointson this purchase
size name:Cab600 / 536x250x41
Stock: Available
Professional tips
Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.
COMPANY
CONTACT US
Categories
₹ 1918.73