1-4 hrs delivery
Bengaluru Karnataka India
Get₹1000
Cart
Categories1-4 hrs deliverySelect delivery location
Product details
Hettich Quadro-V6 Full Extension 30 Kg with Push-to-Open 250 mm with catches. The concealed Quadro runner supports the drawer from underneath. Its push-to-open mechanism releases the drawer when the front is pressed. Full drawer extension. Push-to-open drawer operation. Matching catches included in this runner combination. Selected configuration: 250 mm / 30 Kg.
Features
Hsn code
83021090
Model number
9243241
Manufacturer
Hettich India Private Limited
Item type name
Drawer Runner / Slide
Unit count per product
1
Unit count type
Set
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Intended product use with
250 mm / 30 Kg
Size name
250 mm / 30 Kg
Fulfillment latency
1-4 hours
Specification
- Full drawer extension.
- Push-to-open drawer operation.
- Matching catches included in this runner combination.
- Selected configuration: 250 mm / 30 Kg.
- Slide-on installation with catches and tool-free height adjustment.
FAQs
1. Can I mix this with another brand of hardware?
Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.2. Who should fit this - can a homeowner manage it?
A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.3. How do I make sure a replacement matches in two years?
Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.4. What maintenance does it need?
Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.5. Can I order this in project quantities with a GST invoice?
Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.6. Why does a finish look different between two deliveries?
Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.7. Will this fit my cabinet?
The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.AI generated
Why buy from MOB
Sites need the Quadro-V6 Full Extension 30 Kg with on the day, not the week. Stocked lines move on Qwik within 1 to 4 hours where the service runs, code 9243241 stays on the invoice for reorders, and larger schedules can be priced together through RFQ with GST invoicing.
AI generated
Professional tips
Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.
AI generated
Hettich Quadro-V6 Full Extension 30 Kg with Push-to-Open 250 mm with catches, Article 9243241
₹ 2255.07 31.21% off
MRP: ₹ 3278.00 (With Tax 18.0%) / Set
₹ 2233.79
: Earn
0 pointson this purchase
0 pointson this purchasesize name:250 mm / 30 Kg
Stock: Available
Delivery details
Delivery in 1-4 hrs
Routing ID BENG-415
Professional tips
Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.
AI generated
2026 by Madoverbuilding AI Private Limited
₹ 2255.07