1-4 hrs delivery
Bengaluru Karnataka India
Get₹1000
Cart
Categories1-4 hrs deliverySelect delivery location
Product details
Hettich Self-Closing Intermat 9930 Hinge - TH 52 - Sensys Design. This concealed hinge mounts a cabinet door to the carcase using the specified crank and mounting-plate configuration. Closing action: self-closing. Non-silent concealed Bi-fold hinges with Auto closing features for corner cabinet folding door. Suitable for door thickness 16 - 21 mm. Available with 3D adjustment.
Features
Hsn code
83021090
Model number
9243042
Manufacturer
Hettich India Private Limited
Item type name
Cabinet Hinge
Unit count per product
1
Unit count type
Pair
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Intended product use with
Sensys Design
Size name
Sensys Design
Fulfillment latency
1-4 hours
Specification
- Closing action: self-closing.
- Selected configuration: Sensys Design.
- Non-silent concealed Bi-fold hinges with Auto closing features for corner cabinet folding door.
- Suitable for door thickness 16 - 21 mm.
- Available with 3D adjustment.
FAQs
1. Will this fit my cabinet?
The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.2. Does the listing include mounting hardware and fixings?
The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.3. How much weight will it carry?
Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.4. Can I mix this with another brand of hardware?
Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.5. Who should fit this - can a homeowner manage it?
A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.6. How do I make sure a replacement matches in two years?
Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.7. What maintenance does it need?
Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.AI generated
Why buy from MOB
Buying the Auto Closing Intermat 9930 Hinge - against a published specification beats buying against a photograph. MOB carries the Hettich range with codes shown, ships stocked lines on Qwik in 1 to 4 hours in serviced areas, and invoices with GST on every order placed.
AI generated
Professional tips
Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.
AI generated
Hettich Self-Closing Intermat 9930 Hinge - TH 52 - Sensys Design, Article 9243042
₹ 737.07 27.45% off
MRP: ₹ 1016.00 (With Tax 18.0%) / Pair
₹ 730.12
: Earn
0 pointson this purchase
0 pointson this purchasesize name:Sensys Design
Stock: Available
Delivery details
Delivery in 1-4 hrs
Routing ID BENG-415
Professional tips
Check the carcass is square before the hardware goes near it. A racked carcass binds every time, and no amount of adjustment afterwards fixes the carcass.
AI generated
2026 by Madoverbuilding AI Private Limited
₹ 737.07