• Hettich Self-Closing Onsys 4447 Clip-On Hinge - TH52 - 25mm - 0 Crank with mounting plate and cover caps, Article 9297208 - image 1
  • Hettich Self-Closing Onsys 4447 Clip-On Hinge - TH52 - 25mm - 0 Crank with mounting plate and cover caps, Article 9297208 - image 2
Hettich Self-Closing Onsys 4447 Clip-On Hinge - TH52 - 25mm - 0 Crank with mounting plate and cover caps, Article 9297208
Toggle section

Product details

Hettich Self-Closing Onsys 4447 Clip-On Hinge - TH52 - 25mm - 0 Crank with mounting plate and cover caps. This concealed hinge mounts a cabinet door to the carcase using the specified crank and mounting-plate configuration. Clip-on hinge assembly. Closing action: self-closing. Available with Auto closing system. Available with 105 door opening angle.
Toggle section

Features

Hsn code
83021090
Model number
9297208
Manufacturer
Hettich India Private Limited
Item type name
Cabinet Hinge
Unit count per product
1
Unit count type
Pair
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Intended product use with
0 Crank
Size name
0 Crank
Fulfillment latency
1-4 hours
Toggle section

Specification

  • Clip-on hinge assembly.
  • Closing action: self-closing.
  • Available with Auto closing system.
  • Available with 105 door opening angle.
  • For Full overlay door.
Toggle section

FAQs

1. How much weight will it carry?

Where the source listing states a load rating, that figure is for the fitting and not for the box or shelf attached to it, so deduct that weight first. Where no rating is stated, treat it as general storage duty rather than assuming it will take a concentrated load.

2. Can I mix this with another brand of hardware?

Not within a single assembly, where both halves must be the same model. Across separate units you can, but different makes differ slightly in thickness and geometry, which shifts a front sideways a millimetre or two and shows up as an uneven reveal.

3. Who should fit this - can a homeowner manage it?

A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.

4. How do I make sure a replacement matches in two years?

Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.

5. What maintenance does it need?

Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.

6. Can I order this in project quantities with a GST invoice?

Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.

7. Why does a finish look different between two deliveries?

Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.
Toggle section

Why buy from MOB

Buying the Auto Closing Onsys 4447 Clip On against a published specification beats buying against a photograph. MOB carries the Hettich range with codes shown, ships stocked lines on Qwik in 1 to 4 hours in serviced areas, and invoices with GST on every order placed.

Professional tips

Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.

Brand: Hettich|MOBSKU: 577QWI243

Hettich Self-Closing Onsys 4447 Clip-On Hinge - TH52 - 25mm - 0 Crank with mounting plate and cover caps, Article 9297208

Rating Star4.9
₹ 214.74 27.45% off
MRP: ₹ 296.00 (With Tax 18.0%) / Pair
₹ 212.71PRO price
Unlock
star
: Earnstar0 pointson this purchase
size name:0 Crank
Stock: Available
Delivery details
mobCREDITDelivery in 1-4 hrs
mobCREDITRouting ID BENG-415
mobCREDIT
0% Interest for 21 days 90 days credit periodApply now
mobCREDIT

Professional tips

Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.

₹ 214.74