Select delivery location

Product details
Hettich SlideLine 16 PLUS 3 Door kit 30 kg dampener (Soft closing). This SlideLine 16 PLUS fitting kit is configured for 3 wooden sliding doors and the 30 kg door-load class. 3-door kit; 30 kg per door. Damped soft-closing action. Order the matching profile set separately.
Features
Hsn code
83024200
Model number
9384303
Manufacturer
Hettich India Private Limited
Item type name
Sliding / Folding Door Fitting Set
Unit count per product
1
Unit count type
Set
Country of origin
India
Condition type
New
Currency
INR
Importer contact
Intended product use with
30 kg / 3 Door
Size name
30 kg / 3 Door
Fulfillment latency
1-4 hours
Specification
- 3-door kit; 30 kg per door.
- Damped soft-closing action.
- Order the matching profile set separately.
FAQs
1. Who should fit this - can a homeowner manage it?
A carpenter usually does, because the accuracy is in the marking rather than the fixing. Parts have to sit level and parallel; a couple of millimetres out and the assembly binds or sits crooked. Replacing like for like in an existing cabinet suits a careful DIY fitter.2. How do I make sure a replacement matches in two years?
Keep the article code with the job file. Hardware variants look nearly identical once out of the packet and often differ by a few millimetres, so quoting the code is what gets you the same part rather than something close enough to cause trouble later.3. What maintenance does it need?
Very little. Keep it clear of building dust during fitout, because grit in a moving mechanism is what makes hardware feel notchy a year later. Wipe rather than oil, since oil collects dust and generally does more harm than good on a plated finish.4. Can I order this in project quantities with a GST invoice?
Yes. Bulk hardware goes through RFQ, where you send the article codes and quantities and get a rate against the full list. GST invoicing is issued on every order, and contractors running several sites can use mobCredit to settle on terms.5. Why does a finish look different between two deliveries?
Plated and coated finishes drift between production batches, which is invisible on its own and obvious side by side. Ordering the whole requirement in one go against one code is the only reliable way to keep a run looking consistent under a cabinet light.6. Will this fit my cabinet?
The stated size refers to the module the fitting is designed for, not the clear internal opening. Once carcass sides are deducted the true opening is smaller. Measure inside your carcass and check that figure against the fitting requirement before ordering rather than discovering the gap on site.7. Does the listing include mounting hardware and fixings?
The listing covers the fitting itself against its article code and stated pack unit. Where fixings are not separately listed, check the carton contents against your carpenter's requirement before he starts. Fixings are cheap; a fitter standing idle waiting for them is not.Why buy from MOB
Buying the 3 Door kit 30 kg dampener against a published specification beats buying against a photograph. MOB carries the Hettich range with codes shown, ships stocked lines on Qwik in 1 to 4 hours in serviced areas, and invoices with GST on every order placed.
AI generated
Professional tips
Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.





Hettich SlideLine 16 PLUS 3 Door kit 30 kg dampener (Soft closing), Article 9384303
₹ 2868.33 34.96% off
MRP: ₹ 4410.00 (With Tax 18.0%) / Set
: Earn
0 pointson this purchase
size name:30 kg / 3 Door
Stock: Available
Professional tips
Mark and drill from a single datum across the whole run. Working cabinet by cabinet is how a kitchen ends up with reveals that taper from one end to the other.
COMPANY
CONTACT US
Categories
₹ 2868.33