Select delivery location

Product details
The Philips UltraGlow 3-in-1 LED Downlight 10W is a recessed LED downlight with a memory-enabled 3-in-1 white-light selection. This variant is specified as 10W, Square, Warm White, 1000 lm. It is intended for indoor ceiling and accent lighting and should be installed and used in accordance with the manufacturer's instructions.
Features
Hsn code
94051900
Manufacturer
Signify Innovations India Ltd.
Item type name
LED Light
Number of packages
1.0
Unit count per product
1.0
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Manufacturer warranty description
2 years manufacturer warranty
Item imported
No
Color names
Warm White
Size name
10W (Square)
Finish type
White
Is product expirable
No
Fulfillment latency
1-4 hours
Specification
- Variant: 10W, Square
- Light colour: Warm White
- Rated output: 1000 lm
- Selectable Warm White, Natural White and Cool Daylight
- Memory function retains the selected lighting mode
- Round and square forms listed as separate variants
FAQs
1. Does it need a separate driver above the ceiling?
Where the listing states an integrated driver, no, and that is part of why such fittings are slim. Where the driver is separate, it needs accessible space in the plenum, because a driver buried above sealed gypsum means opening the ceiling again when it eventually fails.2. How long do LED fittings actually last?
Rated life figures apply to the LEDs, but in practice the driver is usually what fails first, and heat is what shortens its life. A fitting boxed into an unventilated ceiling void runs hotter and ages faster than the same one with air circulating around it.3. Will these work on an inverter supply?
LED fittings draw very little, so a whole ceiling of them is a light load on an inverter compared with fans or a pump. Where the listing does not state a voltage range, confirm the specification before committing a floor if your supply swings widely.4. Can I order a full site quantity with a GST invoice?
Yes. Ceiling schedules are worth routing through RFQ rather than the cart, so the whole quantity is priced together instead of at single-piece rates. GST invoicing is standard on every order, and contractors can settle on mobCredit terms.5. Why does one fitting look brighter than its neighbour?
Usually a difference in colour temperature rather than in output, because cooler light reads brighter to the eye at the same lumen figure. Mixing batches or colour temperatures on one circuit is the commonest cause of a ceiling that looks uneven once it is switched on.6. How many of these will a room need?
It depends on room size, ceiling height, wall colour and whether there is other lighting in the room, so there is no single figure. Have your electrician lay the points out on the ceiling and check the spacing before anything is cut, since gypsum does not forgive a second attempt.7. Will it fit my existing ceiling opening?
Only if the cutout matches. An opening smaller than the fitting needs enlarging, and one that is larger will not be covered by the trim. Measure an existing hole before ordering a batch, because a mismatch across twenty ceiling points is an expensive afternoon of making good.Why buy from MOB
MOB lists the UltraGlow 3-in-1 LED Downlight 10W, Square, with its specification and code so nothing turns up as a near match. GST invoicing comes with every order for the site file, contractors can settle on mobCredit terms, and bulk requirements go through RFQ for a project rate.
AI generated





Philips UltraGlow 3-in-1 LED Downlight 10W, Square, Warm White
₹ 545.70 42.56% off
MRP: ₹ 950.00 (With Tax 18.0%) / Unit
: Earn
0 pointson this purchase
colour:Warm White
size name:10W (Square)
Stock: Available
Professional tips
Set the layout out on the ceiling with chalk before a single hole is cut. Twenty points spaced by eye is obvious from the doorway, and gypsum does not forgive a second attempt.
COMPANY
CONTACT US
Categories
₹ 545.70

