1-4 hrs delivery
Bengaluru Karnataka India
Get₹1000
Cart
Categories1-4 hrs deliverySelect delivery location
Product details
Supreme SWR Multi Floor Trap 4.5 inch Height without Jali, 110 mm. Supreme SWR is a PVC soil, waste and rainwater drainage system; its fittings are made to IS 14735.
Features
Hsn code
39174000
Manufacturer
The Supreme Industries Ltd
Item type name
Multi Floor Trap 4.5 inch Height without Jali
Number of packages
1.0
Unit count per product
1.0
Unit count type
Unit
Country of origin
India
Condition type
New
Currency
INR
Sustainable green material check
No
Item imported
No
Size name
110 mm
Are batteries included
No
Is product expirable
No
Specification
- Supreme SWR Multi Floor Trap 4.5 inch Height without Jali
- Size: 110 mm
- For soil, waste and rainwater drainage
- SWR fittings made to IS 14735
- Brand: Supreme
FAQs
1. What is the difference between ring type and solvent type?
A ring-type socket holds a rubber seal and the pipe pushes in; a solvent socket is bonded with cement. Ring joints allow thermal movement and can be dismantled later. Solvent joints are rigid and permanent. Vertical stacks generally use ring joints, short branches often solvent.2. Do I need solvent cement with a ring-type fitting?
No, and using it defeats the purpose. Cement in a ring socket removes the movement allowance and makes future dismantling impossible. What you do need is the correct lubricant on the ring and pipe end so the pipe slides in without dragging the seal from its groove.3. Can a waste-size line take a WC connection?
No. Waste sizes serve basins, sinks, washing machines and balcony drains. A WC discharges into a much larger soil pipe. Connecting a pan into an undersized line will block, and no amount of fall will compensate for a pipe that is simply too small.4. Can this pipe be used underground?
Above-ground drainage grades are not made for buried service. Underground lines take different grades able to handle soil loading and, in places, traffic. Check the specification for the buried portion of the run rather than continuing the same pipe below the plinth.5. How much movement does a ring joint allow?
Enough to absorb the expansion and contraction a plastic stack goes through between a hot discharge and an ambient night, which is what stresses rigid joints until they leak. The specific figure is a manufacturer value, so check the technical literature when detailing a tall stack.6. Do the sealing rings need replacing over time?
Rubber seals age, particularly on joints carrying hot water frequently or sitting in direct sun. On a stack opened for any other reason, inspecting the rings costs nothing. Keeping a few spares in the toolbox is standard practice for anyone maintaining a building's drainage.7. What causes a joint to leak months after installation?
Usually the pipe cut rather than the fitting. A burred or out-of-square end drags the sealing ring out of its seat as the pipe goes in, which holds initially and weeps later. Chamfering and lubricating the end prevents nearly all of these failures.AI generated
Why buy from MOB
MOB lists the PVC S.W.R Door Tee, 50mm, Ring with its specification and code so nothing turns up as a near match. GST invoicing comes with every order for the site file, contractors can settle on mobCredit terms, and bulk requirements go through RFQ for a project rate.
AI generated
Professional tips
Set the fall on a branch run with a level, not by eye. Too little fall leaves solids behind and too much lets water run away from them, and both end in the same blockage.
AI generated
Supreme SWR Multi Floor Trap 4.5 inch Height without Jali, 110 mm
size name:110 mm
Delivery details
your selected location
Professional tips
Set the fall on a branch run with a level, not by eye. Too little fall leaves solids behind and too much lets water run away from them, and both end in the same blockage.
AI generated
2026 by Madoverbuilding AI Private Limited
